Accurate very high definition Toyota Camry 2015 3D model with highly detailed interior fully textured. Headlights and taillights are modelled, doors can be opened. The model includes modelled tires. US number plates are also included.
n 2015, the Toyota manufacturer transforms its Camry almost beyond recognition. Why? Because competitive models also do not stand still, Honda Accord, Nissan Altima, Ford Fusion and others received significant transformations. A large re-design of the Camry 2015 implies a completely new interior, exterior, as well as noise insulation and modernized driving dynamics. Despite the fact that the size of the car remained the same, new body panels adorn the car from all sides except the roof. They give the car an elegant, stately look. The manufacturer also updated the headlights. The upper trim has received LED daytime running lights, and thanks to a more open and low grille, the bottom of the front of the visual, it seems wider. Side mirrors also underwent restoration and moved back a little. Between the taillights, there is a line of metal lining curved towards the bottom, which not only gives a highlight to the rear view but also has a functional purpose. The rearview camera, available in all models, is located just below this facing in the area of the license plate. Upgraded interior perfectly complemented by new wheels.
Most parts of the model have been created as SubDivision/Meshsmooth surface. This means using the 3dSMax or the Maya 2013 version you can change the resolution/smoothness of the surface very easy.
If you import the lowest resolution of the .obj .fbx or .lwo version into a 3D Software that supports SubDivision surfaces you can also change the resolution/smoothness of the surface very easy. The base version of the model which is not smoothed has of 905432polygons.
In 2015, the manufacturer Toyota transforms its Camry almost beyond recognition. Why all? Yes, because competitive models also do not stand still, Honda Accord, Nissan Altima, Ford Fusion and others received significant transformations. A large re-design of the Camry 2015 implies a completely new interior, exterior, as well as noise insulation and modernized driving dynamics. Despite the fact that the size of the car remained the same, new body panels adorn the car from all sides except the roof. They give the car an elegant, stately look. The manufacturer also updated the headlights. The upper trim has received LED daytime running lights, and thanks to a more open and low grille, the bottom of the front of the visual, it seems wider. Side mirrors also underwent restoration and moved back a little. Between the taillights, there is a line of metal lining curved towards the bottom, which not only gives a highlight to the rear view, but also has a functional purpose. The rear view camera, available in all models, is located just below this facing in the area of ​​the license plate. Upgraded interior perfectly complemented by new wheels. Inside the Camry has a new upholstery of the new material for the basic configuration. The choice is also available upholstery material from SofTex suede and leather. The dashboard was redone, the center console got a streamlined shape, and the buttons and joysticks became larger. Most models are equipped with a 6.1 inch touch screen, V-6 models received an upgraded 7 inch screen. After the previous re-design space and comfort of the interior and so was considered one of the advantages of the model. Therefore, with the improvement of its mid-size sedan in 2015, the manufacturer did not change anything. Despite such global changes in design, the engine and transmission remained the same. And in general, it is even very good. The basic 2.5 liter two-chamber engine with a double VVT-i system has a power of 178 hp. and torque of 170 Nm. Also available is a 3.5 liter V-6 with a capacity of 268 hp. and 248 Nm of torque. Both engine variants are aggregated with a 6-speed automatic transmission. Not one of the engines does not have a direct injection system (or turbocharging, of course), however, the V-6 has excellent ride quality and more than enough power for any situation, even with a full load of the cabin and trunk. The four-cylinder engine, too, should please most of the buyers, it works very smoothly, but a little sluggish at idle. Transmission works quickly and clearly. Camry has a newly tuned spring and dampers with dual valve dampers that provide more precise control and good acceleration at low speeds, helping to smooth out body shocks and vibrations at high speed and cruise mode. Manufacturer upgraded the brakes. With the same size as last year’s Camry, the 2015 model gets a new, two-stage master cylinder, which finally eliminated the long stroke of the brake pedal. This gives more confidence in driving time. All Camry models have 10 airbags, including knee for front passengers and side for rear, electronic security system, anti-lock system with electronic brake force distribution. The new Camry has 4 different configurations: LE, SE, XLE and XSE. Models LE and XLE are considered more traditional, SE and XSE are sports. The 2015 Camry LE is equipped with an electric driver's seat, heated side mirrors and 16 inch metal wheels. It also has intermittent wiper, air conditioning, cruise control, deflectable / telescopic steering wheel, power windows and locks, keyless entry and a rear-view camera. The SE model, in addition to all the accessories in the LE, has a sports suspension, high beam spotlights, body-colored spoiler, upholstery from SofTex, leather-covered steering wheel, bright dashboard, chrome trim, 17-inch graphite wheels, etc. . The new XSE model is offered with LED headlights for low and high beam, sporty suede seats, dual-zone climate control, LED daytime running lights and 18 inch treated cast wheels. The XSE V-6 has an electric sunroof, a sun visor mirror, a reading light, an acoustic windshield, an auto-dimming rear-view mirror, and chrome exhaust vents. The XLE model has a Smart Key system with an ignition button, leather-covered seats and an electrically driven driver's seat with lumbar support and 17 inch chrome-plated alloy wheels.
For other software packages that do not support SubDivision surfaces the model is available in 3 different resolutions ranging from 905432to 4522658 polygons.
Max 2010 Format:
Meshsmooth is applied so you can set the object resolution as you like. Just use the Named Selection Set meshsmooth to select the SubD objects and the Named Selection Set interior for the interior. The doors are animated.
Maya 2013 Format:
A selection set for all SubDivision surface parts is included so you can change the resolution easily.
A display layer for the interior is included so you can hide it easily if needed.
Maya 2008/ FBX/ Cinema 4D 9.6/ Lwo 6.0 / Obj/ 3ds Format:
In 3 different resolutions. Interior and exterior are saved separately so you can use the car also without the interior.
Previews rendered in 3dsMax using VRay. Please note that the VRay materials and light settings are not included.
Download Toyota Camry 2015 3D model on Flatpyramid now.
