Accurate very high definition Tata Nano model with detailed interior fully textured. Both the basic and the LX version of the car are included. The model includes textured and modeled tires.
The serial version of the car Tata Nano presented in 2008, with the initial cost of new items in India itself was only $ 2000.
To achieve such a price level, the manufacturer had to make the car extremely primitive, if not to say miserable. The engine - a two-cylinder petrol with a volume of 624 cc. Gives only 38 hp, which is significantly less than that of Japanese key cars, whose engines are limited in volume by approximately the same 0.6 liters. Moreover, the Nano motor located under the boot floor is accessible for maintenance and repair only from inside the car!
And here are a few more “tricks” that allowed Nano to reduce the cost as much as possible: the trunk of the car opens only from the inside, one “janitor” instead of two, no power steering, three mounting bolts for each wheel, instead of the traditional four, only one side mirror in the base configuration, there are no airbags, no external fuel filler (for refueling you need to open the hood).
Despite the expectations of the manufacturer, from a commercial point of view, Nano was a failed project. For example, in the same India, the majority of low-income buyers prefer to acquire lightweight motorcycles, which are twice cheaper than the Nano. And people focused on the purchase of only four-wheeled transport Tata Nano pushed his excessive primitiveness. Also on the sales of avtomobilchika negatively reflected the story of the "instant" price increase. That is, almost immediately after the appearance of Tata, Nano went up almost 1.5 times. According to the manufacturer - due to rising prices for production materials.
Max 6.0 Format:
Meshsmooth is applied so you can set the object resolution as you like. Just use the Named Selection Set meshsmooth to select the SubD objects and the Named Selection Set interior for the interior. The doors are animated.
Maya 8.0 Format:
In 3 different resolutions ranging from 144501 to 1093014 Polygons. Interior and exterior are saved separately so you can render the car also without the interior.
Cinema 4D 9.6 Format:
In 3 different resolutions ranging from 146662 to 1093194 Polygons. Interior and exterior are saved separately so you can render the car also without the interior.
Lwo6.0 Format:
In 3 different resolutions ranging from 142801 to 1091603 Polygons. Interior and exterior are saved separately so you can render the car also without the interior. The lowest poly-version is the SubD. hull. So you can use it easily as SubD in XSI or any Software supporting SubD.
Obj Format:
In 3 different resolutions ranging from 144501 to 1093014 Polygons. Interior and exterior are saved separately so you can render the car also without the interior. The lowest poly-version is the SubD. hull. So you can use it easily as SubD in XSI or any Software supporting SubD.
3ds Format:
In 3 different resolutions ranging from 284457 to 2180985 Polygons. Interior and exterior are saved separately so you can render the car also without the interior.
Previews rendered in XSI.
