Accurate very high definition Mercedes E Class Coupe 2017 model with highly detailed interior fully textured. Headlights and taillights are modeled, doors and trunk lid can be opened. The model includes modeled tires.
Coupe Mercedes-Benz E-class new generation combines beauty and classics, advanced technology and proven technical solutions. The front end is decorated with Multibeam smart headlights with 84 LED elements. The rear part of the coupe contains unusually flat taillights, the lighting pattern of which is designed in the form of a running line - its direction changes depending on whether the car is open or closed. Thanks to innovative crystal optics, the taillights have a brilliant appearance, reminiscent of the glow of a jet engine. The car is equipped with alloy wheels of the original design, the radius of which is up to 18 inches depending on the level of configuration.
SALON MERCEDES E-CLASS COUPE
The luxurious and sporty coupe salon, the main designer of the new interior was the optional dual-screen, consisting of two 12.3-inch high-resolution displays. A display with a virtual dashboard can display information in three modes “Classic”, “Sport” and “Progressive”, depending on what information the driver thinks is important. The base model instead of a dual screen has two round dials and a 17.8 cm color display (1000 x 600 pixels) with a central display 21.3 cm diagonally (960 x 540 pixels). Round dials, instrument cluster, and central display are mounted on the same lacquered insert. In addition, in the cabin, there are sports seats with enhanced lateral support.
EQUIPMENT COUPE MERCEDES E-CLASS 2017
The equipment includes an adaptive cruise control, operating at speeds up to 210 km / h, an automatic parking system with the possibility of remote control via a smartphone, etc.
Under the hood of the new coupe are powerful engines with low exhaust emissions. Like the sedan, the coupe was equipped with a 9-speed automatic transmission.
Most parts of the model have been created as SubDivision/TurboSmooth surface. This means using the 3dSMax or the Maya 2013 version you can change the resolution/smoothness of the surface very easy.
If you import the lowest resolution of the .obj .fbx or .lwo version into a 3D Software that supports SubDivision surfaces you can also change the resolution/smoothness of the surface very easy. The base version of the model which is not smoothed has of 2412644 polygons.
For other software packages that do not support SubDivision surfaces the model is available in 2 different resolutions ranging from 2412644 to 7265205 polygons.
3ds Max 2010 / 3ds Max 2013 Format:
TurboSmooth is applied so you can set the object resolution as you like. Just use the Named Selection Set TurboSmooth to select the SubD objects and the Named Selection Set interior for the interior. The doors and the trunk lid are animated.
3ds Max 2010 version has standard 3ds Max materials applied.
3ds Max 2013 version has VRay materials applied.
Maya 2013 Format:
A selection set for all SubDivision surface parts is included so you can change the resolution easily.
A display layer for the interior is included so you can hide it easily if needed.
Maya 2010/ FBX/ Cinema 4D 9.6/ Lwo 6.0 / Obj/ 3ds Format:
In 2 different resolutions. Interior and exterior are saved separately so you can use the car also without the interior.
Previews rendered in 3dsMax using VRay.