Accurate very high definition Mercedes Benz SLS 2011 model with detailed interior fully textured. Headlights and taillights are modeled and have bump maps applied. The model includes textured and modeled tires.
Mercedes-Benz SLS AMG Roadster (Mercedes-Benz SLS AMG Roadster) - rear-wheel roadster, built on the basis of the SLS AMG coupe. The world premiere of the car took place at the Frankfurt Motor Show in September 2011.
The roadster lost the distinctive feature of a fellow coupe - swinging open doors ("gull wings"). Their place was taken by standard doors, but the car lost nothing from it. It also looks sporty and expensive, not inferior in terms of equipment. In particular, the SLS AMG Roadster is equipped with an AMG Ride Control adaptive suspension and AMG Performance Media multimedia system. The first allows you to change the characteristics of the car, depending on preferences and driving style, and the second gives a lot of useful information in real time, such as lateral and linear accelerations, oil temperature, coolant and air pressure in each tire.
The overall dimensions of the SLS AMG roadster are the same as those of the coupe: length - 4638 mm, width - 1939 mm, wheelbase - 2680 mm. And only the height of the car with a soft top has decreased by a millimeter (up to 1231 mm). The three-layer fabric roof, by the way, folds in 11 seconds at a speed of 50 km / h, without affecting the volume of the 173-liter trunk.
Mercedes-Benz specialists have increased the rigidity of the body and upgraded the frame of the roadster, which is only 6% steel. All the rest is aluminum. As a result, the curb weight of the car increased by 40 kg compared with the coupe and is 1660 kg.
The engine of the Mercedes-Benz SLS AMG Roadster is the same as that of the coupe - 6.2-liter with a V-shaped arrangement of eight cylinders. He gives 571 liters. with. (650 Nm), accelerating the car to the first "hundred" in 3.8 seconds, and the Getrag 7-speed robotic gearbox helps him in this.
SLS AMG Roadster is going to the largest factory of Mercedes-Benz in the German city of Sindelfingen.
Max 6.0 Format:
Meshsmooth is applied so you can set the object resolution as you like. Just use the Named Selection Set meshsmooth to select the SubD objects and the Named Selection Set interior for the interior. The doors are animated.
The polygon count is 165725 polygons at meshsmooth level 0
Maya 8.0 Format:
In 3 different resolutions ranging from 333169to 2546153 polygons. Interior and exterior are saved separately so you can render the car also without the interior.
Cinema 4D 9.6 Format:
In 3 different resolutions ranging fro 333169to 2546153 polygons. Interior and exterior are saved separately so you can render the car also without the interior.
Lwo 6.0 Format:
In 3 different resolutions ranging from 333169to 2546153 polygons. Interior and exterior are saved separately so you can render the car also without the interior. The lowest poly-version is the SubD. hull. So you can use it easily as SubD in XSI or any Software supporting SubD.
Obj Format:
In 3 different resolutions ranging from 333169to 2546153 polygons. Interior and exterior are saved separately so you can render the car also without the interior. The lowest poly-version is the SubD. hull. So you can use it easily as SubD in XSI or any Software supporting SubD.
3ds Format:
In 3 different resolutions ranging from 332944 to 2545926 triangles. Interior and exterior are saved separately so you can render the car also without the interior.
Previews rendered in XSI.
