Accurate very high definition Mercedes S Class AMG S63 2018 model with highly detailed interior fully textured. Headlights and taillights are modelled, doors and trunk lid can be opened. The model includes modelled tires.
Externally, the new Mercedes S63 AMG (2016-2017) does not stand out too much from the base version: among the main differences, another front bumper with increased air intakes, side “skirts”, four exhaust manifolds, other 19-inch wheels (other extras are available) wheels with a diameter of 20 inches) and a small decor.
The engine on the Mercedes S 63 AMG is a 585-strong "eight" biturbo of 5.5 liters, developing a peak torque of 900 Nm. The transmission is the seven-band AMG Speedshift MCT. On all-wheel-drive versions, the distribution of thrust along the axles is 33:67 in favor of the rear wheels. The box has three modes of operation: Controlled Efficiency, Sport and Manual. The first activates the “start/stop” system and focuses on economical driving, while the other two are designed for a more active drive and open the exhaust flap.
The new Mercedes-Benz S63 AMG (2015-2016) spends 4.0 seconds (with all-wheel drive) to accelerate from 0 to 100 km / h, and the rear-wheel-drive version is 0.4 seconds slower. The maximum speed in both versions is electronically limited to 250 km / h. Improved dynamics contributed not only to a more powerful engine but also the reduced weight of the car. Compared to its predecessor, the S63 AMG in the new body of the W222 has become a hundred kilograms lighter - its weight is 1,970 (Short) and 1,995 kg (Long), respectively. The reduction was facilitated by aluminum roofs and front panels, forged wheel rims, composite carbon-ceramic brake discs, a carbonic niche for the spare tire and a lithium-ion battery as a starter (instead of the usual lead-acid one).
Most parts of the 3D model have been created as SubDivision/Meshsmooth surface. This means using the 3ds Max or the Maya 2013 versions you can change the resolution/smoothness of the surface very easy.
If you import the low resolution of the .obj .fbx or .lwo version into a 3D Software that supports SubDivision surfaces you can also change the resolution/smoothness of the surface very easy. The base version of the model which is not smoothed has of 2708485 polygons.
For other software packages that do not support SubDivision surfaces the model is available in 2 different resolutions ranging from 2708485 to 9846535 polygons.
3ds Max 2010 / 3ds Max 2013 Format:
TurboSmooth is applied so you can set the object resolution as you like. Just use the Named Selection Set TurboSmooth to select the SubD objects and the Named Selection Set interior for the interior. The doors are animated.
3ds Max 2010 version has standard 3ds Max materials applied.
3ds Max 2013 version has VRay materials applied.
Maya 2013 Format:
A selection set for all SubDivision surface parts is included so you can change the resolution easily.
A display layer for the interior is included so you can hide it easily if needed.
Maya 2010/ FBX/ Cinema 4D 13/ Lwo 6.0 / Obj/ 3ds Format:
In 2 different resolutions. Interior and exterior are saved separately so you can use the car also without the interior.
Previews rendered in 3ds Max using VRay.
