Bakeware 3D Models

Showing all 4 results

Bakeware 3D models on Flatpyramid.

By execution, bakeware is made as a separate unit or embedded. Built-in hobs usually have a separate hob and oven.

The cooking surface of the cooker consists of several burners for installing dishes on them. In the gas and electric stoves, each burner is controlled by a separate handle. Typically, burners have a different diameter and different maximum power. This is necessary in order to install dishes of different sizes on them, without fear of significant energy loss and damage to parts of dishes that are not designed for high temperature.

The oven is a heat-insulated muffle in which heating elements are installed: gas burners or electric heaters. The temperature required for cooking is maintained in the oven. Usually, the heating elements are located above and below. If the lower heater provides convection, the upper heats the food being cooked due to radiation.

The type of heating is important not only for co-ovens with a hob, but it also depends on the method of installation and the functionality of the oven. The oven with gas heating type usually has less cooking capacity.

In the oven can be placed trays, grills and skewers, to accommodate the prepared products.

Bakeware 3D models file formats: 3ds dxf c4d obj